Ductwork and Airflow Services In MariettaServing Cobb, Cherokee, North Fulton, Paulding, Bartow and North DeKalb counties, GA
- Supply and Return Airflow Analysis
- Whole-System Approach
- Licensed and Insured
Tell us which room is the problem
Need someone now? Call 770.726.7407 — answered 24/7.
- Trane Authorized Dealer
- All Technicians NATE Certified
- Licensed and Insured
- 40+ Years Combined
- Lifetime Craftsmanship Warranty On Installs
Most Duct Problems Look Like Equipment Problems
A house can have a newer air conditioner, a clean filter, and a thermostat set exactly where it should be, and still have one bedroom that runs warm every afternoon. When that happens, the air is usually being lost or held back somewhere between the equipment and the room, and in most homes here those runs sit in an attic that gets far hotter than the house does.
Innovative Mechanical measures what a duct system delivers, room by room, before anyone recommends work. Some systems need their joints sealed, some need a return added, and some are already doing their job. You will hear which of those yours is.
- Supply and return airflow measured on every replacement quote.So the equipment is matched to what your ducts can carry, not to the box being removed.
- 40+ years of combined experience.From airflow problems to poor duct layouts, our experience helps us find what is affecting your home's comfort.
- Before We RecommendWe measure your airflow first so you know what your home actually needs.
- One company for the ducts and the equipment.The airflow and the system stop being two separate conversations with two separate companies.
Duct Work We Handle In Marietta Homes
Duct work is not one job, and which one a house needs depends on what the measurements show. If you already know which of these you are after, begin there, and if you do not, describe the room and we will work it out with you.
Airflow
Supply and Return Airflow Analysis
Not sure whether the equipment or the ducts are at fault? We measure what the supply and return sides are moving, compare it against what your rooms need, and show you the readings before any work is recommended.
Send Us a Message
Design
Duct Design and Load Calculations
A load calculation works out how much heating and cooling each room needs, and the design decides whether that air ever arrives. We size the runs, plan the returns, and lay the system out around your home rather than around the old layout.
Send Us a Message
Sealing
Duct Sealing
Joints separate, tape gives up, and a run can pull loose in an attic where nobody would see it. We trace the losses, seal the connections, and put the air you paid to cool back into the rooms that were short of it.
Send Us a Message
Modification
Duct Modification and Replacement
Where rooms have been added over the years, a duct layout usually ends up working against itself. We reroute the runs that starve each other, replace what is past sealing, and leave the layout matched to the house as it stands now.
Send Us a Message
New Runs
New Duct Runs For Added Rooms
An addition or a finished basement often ends up with one register, no return, and a room that never keeps up. We run new supply and return duct out to it, tie it into the existing system, and rebalance the nearby rooms so nothing loses air.
Send Us a MessageIf the readings come back clean, then the ducts are not your problem and the equipment is, which is a different conversation. Explore AC Installation and Replacement in Marietta to see how a system gets sized.
Why Duct Work Is Priced After We Measure
Two houses of the same size can need completely different duct work, so a figure quoted before anyone has been up in the attic is not worth planning around. We come out, take the readings, look at the runs you have, and then hand you a written estimate for the work those readings point to.
Your estimate names what is being sealed, rerouted, replaced or added, and what we are leaving alone. Where sealing and one added return would solve the complaint, that is the version you get priced first. The work starts when you say so, and not a step before.
Not Every Duct Problem Needs A Rebuild
Sealing Solves More Houses Than Redesigning Does
Most of what we find is leaks at the connections, one starved room, or a single badly routed run, and those get corrected without touching the rest of the system. A full redesign is the right answer in a minority of houses, and when yours is one of them you will hear the reason it applies.
| What You Are Deciding | Sealing and Modification | Redesign and Replacement |
|---|---|---|
| What the readings show | Losses at the joints, one room short of air, or a return that is too small | Runs undersized across the house, or a layout that was never right to begin with |
| Where it usually applies | Homes where one or two rooms are the complaint | Homes where nothing has ever felt even, or where rooms were added on |
| What gets touched | The connections, one or two runs, and sometimes an added return | The trunk, the branches and the returns, planned around a load calculation |
| What changes for you | The rooms that were short on air catch up with the rest | The whole house holds an even temperature instead of chasing it |
| When it is the wrong call | When the runs are too small to carry the air however well they are sealed | When sealing and one added return would have done the same job |
We Fix The Ducts Before We Sell A Bigger Unit
Numbers Come Before Recommendations
Every duct recommendation we make starts with a reading rather than with a look. We measure both the supply and the return side, work out what each room should be getting, and compare that against what it is getting. The readings go on your estimate, so the recommendation can be checked instead of taken on trust.
A Duct Job Can Wait For A Quieter Week
Duct work is planned work, and that is an advantage. It can be scheduled for a stretch when the house is not leaning on the system to keep up, which is easier on everyone and better for the work itself. We would rather open up a duct system in a mild week than in the middle of July.
Sometimes The Answer Is That Nothing Needs Doing
A fair share of the duct systems we measure turn out to be adequate, and when that is the case we say so and leave it alone. We would rather lose the job than sell an attic full of new metal to a house whose real trouble is a thermostat in the wrong place, or equipment near the end of its life.
From One Warm Room To A Balanced House
The order stays the same whether the answer turns out to be a seal, a new run, or nothing at all.
-
1
Contact Us and We'll Listen
Tell us which rooms never keep up and what the house has had done to it, additions included. Those details decide how much time we need to set aside for the visit.
-
2
Professional Evaluation
We take airflow readings at the supply and at the returns, follow the runs as far as they can be reached, and check the layout against what each room is asking of it.
-
3
Honest Recommendations
You get a written estimate naming the work, the runs involved, and everything we are leaving alone, with the reasoning attached to each. Where the ducts are adequate, that is what it says.
-
4
Relax
The work happens on a day you picked, and we walk the rooms with you afterwards so the difference is something you notice for yourself rather than something you are told about.
Send Us a Message
Prefer to talk now? Call 770.726.7407 — answered day or night.
A Duct Question Is Worth A Visit On Its Own
You Do Not Have To Be Buying A System
Plenty of the duct calls we take have nothing to do with a replacement. A room that has never kept up is reason enough to have someone out on its own, and the visit does not turn into a conversation about new equipment unless the readings send it there.
What The Visit Involves
Looking at ducts takes longer than looking at a unit. We need to get to the runs, which usually means an attic or a crawl space, and we take readings at the registers and the returns in the rooms that matter. Clear access to both saves everybody time.
The Duct Faults Worth Calling About Sooner
Most duct work can be planned, and a few faults should not be. A run that has come loose, water staining on or under a duct, or a room that has gone from weak air to none at all will pull attic air into the house and get worse while they wait.
Where We Take Duct Work
Duct work runs the same routes our service calls do, out of Marietta and across the counties below. Older housing and homes that have been added onto are common right across this area, which is why so many of these calls begin with one room rather than with a system that has stopped. Addresses out at the edges are worth a quick phone call to check before you plan anything around it.
Service Areas
Bartow County
Cartersville • Emerson
Cherokee County
Canton • Holly Springs • Woodstock
Cobb County
Acworth • Austell • Kennesaw • Marietta • Mableton • Powder Springs • Smyrna
DeKalb County
Atlanta (north of I-20) • Avondale Estates • Brookhaven • Chamblee • Clarkston • Doraville • Dunwoody • Lithonia • Pine Lake • Tucker
North Fulton County
Alpharetta • Johns Creek • Milton • Roswell • Sandy Springs
Paulding County
Dallas • Hiram
Reviews From Our Neighbors, One Consistent Story
Read the reviews our neighbors have left on Google, and what people keep saying isn't about a flashy sales pitch — it's simpler than that. Honest. Showed up when they said they would. Never tried to sell me something I didn't need. That's the whole job, done right, one home at a time.
“One of the most reliable small businesses I've ever worked with… They never tried to upsell me or pushed me to sign maintenance contracts. [Our technician] was on time, communicated with me on every step, and was really careful to leave my house in pristine condition — and extremely gentle with my pets.”
“Great service and fair price. I had the opportunity to meet the owner Chad and he is running a very strong organization. His employees are well trained and the pricing is very fair.”
“This was the second time that I have counted on Chad and his team for their quick response, professionalism, speedy repair and honesty! I highly recommend!”
“Quick service. Very professional. More than fair pricing. Refreshing to have a company doing honest work at affordable prices. Great company!”
“This company was recommended to me and I don't regret it. They are very punctual and do a great job. The price also seemed very reasonable to me.”
“One of the most reliable small businesses I've ever worked with… They never tried to upsell me or pushed me to sign maintenance contracts. [Our technician] was on time, communicated with me on every step, and was really careful to leave my house in pristine condition — and extremely gentle with my pets.”
“Great service and fair price. I had the opportunity to meet the owner Chad and he is running a very strong organization. His employees are well trained and the pricing is very fair.”
“This was the second time that I have counted on Chad and his team for their quick response, professionalism, speedy repair and honesty! I highly recommend!”
“Quick service. Very professional. More than fair pricing. Refreshing to have a company doing honest work at affordable prices. Great company!”
“This company was recommended to me and I don't regret it. They are very punctual and do a great job. The price also seemed very reasonable to me.”
Frequently Asked Questions
Do you clean air ducts?
No, and it is not work we would ask you to pay for. Cleaning moves dust around, while the duct problems that change how a house feels are leaks, restrictions, and runs that were never sized right. Sealing a connection or adding a return does something a vacuum cannot.
How do I know if the ducts are the problem and not the air conditioner?
The readings answer that. If the equipment is producing what it should and a room is still short of air, then the air is either going somewhere else or never getting there. That is why we measure both sides before recommending anything, rather than starting from the more expensive assumption.
Can part of a duct system be fixed without replacing all of it?
Usually, yes. Sealing the connections, resizing one run, or adding a return solves a large share of the complaints we get called about, and none of it means touching the rest of the system. A full redesign is the answer in fewer houses than most people expect.
Can you add ducts to a room that never had them?
Yes, provided there is a route to the room and the existing system has capacity to serve it. We check both before quoting, because tying a new room into a system already at its limit takes air away from the rooms that currently have it.
What does a load calculation tell you?
It works out how much heating and cooling each room needs, based on the room itself rather than on square footage alone. That figure is what a duct design gets built around, and it is the difference between a layout that balances and one that gets adjusted forever.
